Internet Surfer 2.0/Internet Surfer 2.0 (Wayzata Technology) (1996).iso/pc/text/mac/faqs.140

Text File | 1996-02-12 | 27.7 KB | 758 lines

Frequently Asked Questions (FAQS);faqs.140



    This is a general technique that allows you to bind in specific system
    routines, while still referencing the standard shared libraries.

    Specifically, use this command to bind the xlf libraries to the Fortran
    objects:

       $ ld -bh:4 -T512 -H512 <your objects> -o intermediat.o \
         -bnso -bI:/lib/syscalls.exp -berok -lxlf -bexport:/usr/lib/libg.exp \
         -lg -bexport:<your export file>

    The argument -bexport:<your export file> specifies a file with the
    name of all entry points that are to be visible outside the intermediate
    module.  Put one entrypoint name on a line.  The -bI:/lib/libg.exp line
    is required for proper functioning of the program.  The -berok argument
    tells the binder that it is ok to have unresolved references, at least
    at this time (you would think -r would work here, but it doesn't seem to).
    The -bnso argument causes the required modules to be imported
    into the object.  The -lxlf, of course, is the xlf library.

    Then, bind the intermediate object with the other shared libraries in
    the normal fashion:

       $ ld -bh:4 -T512 -H512 <C or other modules> intermediate.o \
         /lib/crt0.o -lm -lc

    Note the absence of -berok.  After this link, all references should
    be resolved (unless you're doing a multistage link and making another
    intermediate).

    NOTE THE ORDER OF MODULES.  This is extremely important if, for example,
    you had a subroutine named "load" in your Fortran stuff.  Putting the
    C libraries before the intermediate module would make the C "load"
    the operable definition, rather than the Fortran version EVEN THOUGH
    THE FORTRAN MODULE HAS ALREADY BEEN THROUGH A LINK AND ALL REFERENCES
    TO THE SYMBOL ARE CONTAINED IN THE FORTRAN MODULE.  This can
    be extremely difficult to find (trust me on this one :-)  Is this
    a bug, a feature, or what?

    [As mentioned in section 2.03 of this article, it is a feature that you
    can replace individual objects in linked files, ed.]

    The result will be a slightly larger object than normal.  (I say slightly
    because mine went up 5%, but then its a 2 MB object :-)


Comments & Caveats:

   From the documentation the -r argument to the linker should do what
   -berok does.  It does not.  Very strange results come from using the
   -r argument.  I have not been able to make -r work in a sensible manner
   (even for intermediate links which is what it is supposed to be for).
   Note: this is one of the things I gave up on.  I would like to hear
   from anyone with more info on this.

   When binding an intermediate module, use an export file to define the
   entry points you want visible in the later link.  If you don't do this,
   you'll get the dreaded "unresolved reference" error.  Import files name
   entry points that will be dynamically resolved (and possibly where).

   If you are in doubt about what parameters or libraries to link, use the
   -v arg when linking and modify the exec call that shows up into
   an ld command.  Some thought about the libraries will usually yield an
   idea of when to use what.  If you don't know what an argument is for,
   leave it in.  It's there for a purpose (even if you don't understand it).

   Watch the order of external definitions (ie, libraries) when more than
   one version of a routine may show up, eg "load".  The first one defined
   on the ld command line is the winner.

   The getenv (and system and signal) problem is a problem that started out
   minor, got somewhat worse in 3003 and, eventually will be correctly fixed.
   Basically, you should extract the 3002 version of these three routines
   from xlf.a before doing the update and save them away, then link these
   routines in if you use these Fortran system services.


3.03: How do I check if a number is NaN?
From: [e-mail] (Stephen Linam)

NaN is "Not a Number".  It arises because the RISC System/6000 uses
IEEE floating point arithmetic.

To determine if a variable is a NaN you can make use of the property
that a NaN does not compare equal to anything, including itself.
Thus, for real variable X, use

    IF (X .NE. X) THEN    ! this will be true if X is NaN

Floating point operations which cause exceptions (such as an overflow)
cause status bits to be set in the Floating Point Status and Control
Register (FPSCR).  There is a Fortran interface to query the FPSCR, and
it is described in the XLF Fortran manuals -- I don't have the manuals
right here, but look for FPGETS and FPSETS.

I don't know of any tutorials about IEEE Floating Point beyond the
standards themselves: ANSI/IEEE STD 754-1985 (IEEE Standard for Binary
Floating-Point Arithmetic) and ANSI/IEEE STD 854-1987 (IEEE Standard for
Radix-Independent Floating-Point Arithmetic), both available from IEEE.
The IBM manual "Risc System/6000 Hardware Technical Reference - General
Information" (SA23-2643) describes what floating point exceptions can
occur and which bits are set in the FPSCR as a result of those exceptions.

______________________________________________________________________________
4.00: Public Domain software

There is a lot of interest in PD software, and a number of people have
compiled some of this.  With the increasing interest in the RS/6000,
configuration files, etc. is often seen in PD software or can be
obtained from people who already ported it.


4.01: How do I find sources?

[ [e-mail] (Dick Karpinski) asked me to include this
 information, and he forwarded me an article from [e-mail]
 (Jonathan Kamens).  Ed. ]

There is a newsgroup devoted to posting about how to get a certain
source.  It is however strongly urged to follow the guidelines in
the article How_to_find_sources(READ_THIS_BEFORE_POSTING), which you
can get via anonymous ftp from pit-manager.mit.edu (18.172.1.27):

/pub/usenet/comp.sources.wanted/H_t_f_s_(R_T_B_P)

Also available from [e-mail] by sending a mail
message containing:

send usenet/comp.sources.wanted/H_t_f_s_(R_T_B_P)

Send a message containing "help" to get general information about the
mail server.

If you don't find what you were looking for by following these
guidelines, you can post a message to comp.sources.wanted.


4.02: Are there any ftp sites?

Here is a list of some sites that are supposed to have RS/6000 specific
software.  I haven't verified all the entries.

aixpdslib.seas.ucla.edu    128.97.2.211    pub
acd.ucar.edu        128.117.32.1     pub/rs6000
acsc.acsc.com       143.127.0.2    pub
byron.u.washington.edu    128.95.48.32    pub/aix/RS6000
cs.utk.edu        128.169.201.1    pub/ibm_rs6000
merit.edu        35.1.1.42    pub/xntp
lightning.gatech.edu    128.61.10.8    pub/aix
tesla.ee.cornell.edu    128.84.253.11    pub
nic.funet.fi         128.214.6.100    pub/unix/AIX/RS6000

The first one above is dedicated to software running on AIX.  It might
not always be the latest versions of the software, but it has always
been ported to AIX (normally AIX version 3 only).  Once connected, you
should retrieve the files README and pub/ls-lR.

Please note that the last one is in Finland, i.e.  in EUROPE! They are
having much too many people ftp'ing from the US which is hard on the
transatlantic link - further, most of the software it carries has been
taken from US sites originally.  Therefore, please use this site ONLY if
you are in Europe, preferably only from the northern part of Europe.

Further, [e-mail] (Konrad Haedener) has an archive on
a system in Switzerland.  Here is his information about the archive:

As previously announced I have opened our machine for anonymous FTP.  I
have a small but growing collection of RS/6000 software, i.e. versions
of popular software that should readily compile under AIX 3.1.5.

Contributions are always welcome (please consult the /README file).
This is host iacrs1.unibe.ch (130.92.11.3).

Do remember, that Switzerland is in Europe, i.e. keep the transatlantic
transfers on a minimum.


4.03: General hints

In general, curses based applications should be linked with -lcurses and
_not_ with -ltermlib.  It has also been reported that compiling with
-DNLS helps curses based programs.

Note that the RS/6000 has two install programs, one with System V flavor
in the default PATH (/etc/install with links from /usr/bin and /usr/usg),
and one with BSD behavior in /usr/ucb/install.


4.04: GNU Emacs
From: Bill Wohler <[e-mail]>

Version 18.57 of GNU Emacs has RS/6000 support.  Here are a few hints:
In the src directory, copy config.h-dist to config.h and make the
following changes:

    o change "s-bsd4-2.h" to "s-aix3-1.h"
    o change "m-vax.h" to "m-ibmrs6000.h"
    o define HAVE_X_WINDOWS
        o define X11
        o define PURESIZE 135000 (120000 is enough without X)
        o if you don't want to compile with debugging information, add:
          #define C_DEBUG_SWITCH
          #define C_OPTIMIZE_SWITCH -O

Now, run "make" and ignore the sed problems while building xmakefile.

Emacs will core-dump if it is stripped, so don't strip when you install
it.  You can e.g.  edit (a copy of the) Makefile in src replacing all
'install -s' with /usr/ucb/install.

[The latest version of emacs is 18.59 but I did not have a chance to
look at it yet. - ed.]


4.05: gcc/gdb

GNU C version 2.0 supports the the RS/6000, and compiles straight out of
the box.  You may, however, experience that compiling it requires large
amounts of paging space.

The latest versions of gcc and gdb, currently 2.3.1 and 4.6
respectively, requires a patch to the 'as' assembler to compile.  Call
IBM software support and request patch U4     .

4.06: GNU Ghostscript 2.3

The PostScript interpreter GNU Ghostscript Version 2.3 supports the
RS/6000 and can be found on various ftp sites.

4.07: TeX

TeX can be retrieved via ftp from rusmvl.rus.uni-stuttgart.de (129.69.1.12).


4.08: perl

A diff should have been posted here, but I haven't seen it.  If you use
bsdcc from the bsdport document, say no to use perl's builtin malloc(),
and edit config.H to '#define HAS_SYMLINK', you should be on your way.
Bill Wohler tells me that perl will run without editing config.H and
with cc as well.  So just say no to use perl's malloc().

Doug Sewell <[e-mail]> adds:

In addition to not using the perl-provided malloc, when asked if you
want to edit config.sh, change 'cppstdin' from the wrapper-program
to '/lib/cpp'.

The perl wrapper name is compiled into perl, and requires that you keep
that file in the source directory, even if you blow away the rest of
the source.  /lib/cpp will do the job by itself.  I suspect this will
be fixed in perl 4.0pl11 Configure script.

Also, beware if you have gdbm installed per the instructions in the FAQ.
Gdbm is compiled with bsdcc; perl (as I installed it, anyway) was built
with cc, so I used the IBM-provided ndbm routines.


4.09: X-Windows

IBM has released X11R4 and Motif 1.1 in combination with AIX 3.2.0.
X11R5 is available as AIXwindows 1.2.3 since AIX Level 3.2.3.

Those of you on 3.1 might want to read the following.  Some people from
IBM have released patches for the X11R4 distribution tape available via
anonymous FTP from export.lcs.mit.edu.  Note that as with the RT, there
is no X11R4 server to build, just the libraries.

From: Frederick Staats <[e-mail]>

In mit/config/ibm.cf
    Updated OSName (AIX 3.1.6)

In mit/config/site.def
    Changed ProjectRoot /usr/local/X11R5
    Added ManSuffix (to change suffix from n to 1)
    Added InstallXdmConfig YES and
    InstallXinitConfig YES
    Added HasXdmAuth YES (Copied mit/lib/Xdmcp/Wraphelp.c to source tree)
    Added InstallFSConfig YES

In mit
    nohup make BOOTSTRAPCFLAGS="-Daix" World &
    nohup make install &
    nohup make install.man &

Please note that there are known bugs in Xibm server of the X11R5
release that prevent "xdm" from being usable.  A simple patch (that I'm
not free to redistribute) should be out very soon through the regular
contrib channels.

Also note, that some files in mit/extensions/lib/PEX/c_binding are very
large and are told to require at least 150 Mb paging space to compile.

Apparently, only the Skyway adapter is supported for X11R5.

[the Skyway adapter is "IBM Color Graphics Display Adaptor" in IBM
documents, the "IBM High-Performance N-Bit 3D Color Graphics Processor"
is the Sabine.  Ed.]


From: [e-mail] (Andrew Pierce)

The following bugs have been reported with the R5 server and are fixed
(hopefully!), and the fixes have been sent to MIT for inclusion in the
first patch set:

BackingStore does not seem to work (twm menus blank and xman pulldown
    menus only display once.
Problem in keyclick restoration/bell
Problem with option parsing (-bs does not turn off backing store).
Problem with setting non-blocking I/O on X Connections
    (resizing xcalc wedges the server).
xdm core dumps.

There is also a problem in initializing the display adapter when the R5
server is brought up from a poweroff condition on the RISC/6000.  We are
still investigating this problem.  A temporary workaround is to run the
AIX product server first, which seems to do the right thing in
initializing the adapter, then run the R5 server.

As for whether the OSF/Motif window manager will work with the R5
server, I don't know of any reasons why it shouldn't, and I've run it
now and again, although tvtwm is my preferred wm.


From: [e-mail] (John R. Cary)

There are (at least) three problems.

1) The fonts as built with the IBM (Greening) patches of X11R4 do not
work with the AIX3.1.5 server because (according to [e-mail])
they likely have the wrong byte order.
2) The ibm fonts that come with AIX3.1.5 must be converted to .pcf fonts
to work with the X11R5 server.
3) Info always looks for its fonts (in /usr/lpp/info/X11fonts)
regardless of which server you are using.  So if you use the X11R5
server, info loads the AIX3.1x .snf fonts, which do not work with the
X11R5 server.

Using the X11R5 server (my choice) means that you must fix problems 2
and 3.

My fix of 3: was simply to rename the info fonts directory so that info
could not find it and load it.  Another fix (I am told) is to set one's
font path with /usr/lpp/info/X11fonts last so that another fonts is
loaded first.  This did not work for me, perhaps because of differences
in my fonts.alias file.

My fix of 2: I first got snftobdf from the X11 contrib directory on
export.lcs.mit.edu and built it. I then made a directory:
mkdir /usr/local/X11R5/lib/X11/fonts/ibm
which I added to my font path with xset in my .xinitrc file.
Then I constructed the chosen .pcf fonts one at a time:
cd /usr/lib/X11/fonts
snftobdf Rom10.snf | bdftopcf >/usr/local/X11R5/lib/X11/fonts/ibm/Rom10.pcf
I actually did this with this script:

#!/bin/ksh
# A script to convert desired AIX fonts to .pcf fonts for X11R5
for arg in 6x10 Bld14 Rom14 Rom6 6x12 Bld17 Rom16 Rom7 vtbold 6x13
Erg 14 Rom17 Rom8 vtdhbot 8x13 Itl14 Rom22 cursor vtdhtop 8x13B Rom10
Rom28 fixed vtdwidth 9x15 Rom11 Rom29 Vtsingle
do

echo "snftobdf $arg.snf | bdftopcf >/usr/local/X11R5/lib/X11/fonts/ibm/$arg.pcf"
snftobdf $arg.snf | bdftopcf >/usr/local/X11R5/lib/X11/fonts/ibm/$arg.pcf

done

If you want to continue using the AIX3.1x server and you want to use the
X11R4 fonts, you must convert these fonts to the correct bit order.  I
did not do this, and so DO NOT KNOW the correct procedure.  I imagine
that once the correct bit order is determined, one can use snftobdf to
convert fonts back tobdf format then bdftosnf with correct AIX3.1.  bit
order to get things correct with the aix3.1x server.


4.10: bash

Bash is ported and has some patches on prep.ai.mit.edu.  The current
version is 1.12 and seems to work fine.


4.11: Elm

Elm should be pretty straightforward, the only thing to remember is to
link with -lcurses as the only curses/termlib library.  You may also run
into the problem listed under point 2.13 above.

4.12: Oberon 2.2

From: [e-mail] (Andreas Siegert)

Oberon is Wirth's followon to Modula-2, but is not compatible.  A free
version of Modula-3 is available from DEC/Olivetti at gatekeeper.dec.com.
This is also not a Modula-2 replacement but a new language.  There are
currently two M2 compilers for the 6000 that I know of.  One from
Edinburgh Portable Compilers, contact [phone] (UK) or the
Gardens Point compiler contact [phone] (Switzerland).

Oberon can be obtained via anonymous ftp from neptune.inf.ethz.ch
(129.132.101.33) under the directory Oberon/RS6000 or gatekeeper.dec.com
(16.1.0.2).


4.13: Kermit

Available from watsun.cc.columbia.edu [128.59.39.2] directory kermit/sw.
Get it, uncompress, untar, and "make rs6000", and it works.

5a184 had a bug with the lock file names.  Grab the latest from
watsun.cc.columbia.edu in the kermit/test directory.  (5a is still
officially in beta, so get your bug reports in quick if you want them
fixed before 5b.)


4.14: Gnu dbm
From: [e-mail] (Doug Sewell)

Here's the fixes for RS/6000's:

apply this to testgdbm.c:
158c158
<   char opt;
---
>   int opt;
166c166
<   while ((opt = getopt (argc, argv, "rn")) != -1)
---
>   while ((opt = getopt (argc, argv, "rn")) != EOF)

Apply this to systems.h:
111a112,114
> #ifdef RS6000
> #pragma alloca
> #else
112a116
> #endif

To compile, edit the Makefile.  Set CC to bsdcc (see /usr/lpp/bos/bsdport
if you don't have 'bsdcc' on your system) and set CFLAGS to -DRS6000 and
whatever options (-g, -O) you prefer.  Don't define SYSV.

Doug Sewell, Tech Support, Computer Center, Youngstown State University
[e-mail] [e-mail] [e-mail] uunet!ysu.edu!doug


4.15: tcsh
From: [e-mail] (David Cordes)

tcsh : available from telsa.ee.cornell.edu  (pub/tcsh-6.00 directory)
Compiles with no problems.  You must edit /etc/security/login.cfg
to permit users to change to this shell (chsh), adding the path
where the shell is installed (in my case, /usr/local/bin/tcsh).


4.16: Kyoto Common Lisp
From: [e-mail] (David Cordes)

kcl : Kyoto Common Lisp.  The sources are available from "cli.com".  The
kcl package is the needed base, then also retrieve the latest akcl
distribution.  akcl provides a front-end that "ports" the original kcl
to a number of different platforms.  The port to the 6000s worked with
no problems.  However, you must be "root" for the make to work properly
with some memory protection routines.


4.17: TCL
From: Doug Sewell <[e-mail]>

   === building the tcl library ===

First, V3.3 compiled with BSDCC, but tclTest would core-dump.

I retrieved V4.0 from the alt.sources archives, but couldn't get it
to compile on an RS6000, using either the BSD or SYSV versions.

Finally, someone mentioned that Tcl5.0 was available.

I ftp'd sprite.berkeley.edu.  The only version of 'tcl' was 3.3.
The version 5 is a part of 'tk.tar.Z'.  You have to un-tar-Z that
and get tcl 5.0 out of there.

Next, I built it with 'bsdcc' (make "CC=bsdcc").  I had to replace the
provided stdlib.h with the AIX stdlib.h because of some conflicts.  I
built tclTest, cd'd to 'tests', ran ../tclTest and entered 'source all'.

I got an error in file.test when I ran the program as root.  When I ran
it as anyone else, it runs fine - it has something to do with a file you
shouldn't be able to get to, but because I wase root I could anyway.

I copied tcl.a to /usr/lib/libtcl.a, and put tcl.h into /usr/include.
Your procedures for local libraries and includes may vary.  I also put
tclTest in a public executable directory, since it was a way to putter
with tcl interactively.

NOTE: since libtcl.a was built with bsdcc, you'll probably have to use
bsdcc to write or support any tcl applications, including expect.


4.18: Expect
From: Doug Sewell <[e-mail]>

To build the command-interpreter version, you must have the tcl
library built successfully.  The expect library doesn't require tcl.
Note: Expect and its library are are built with bsdcc, so applications
using the library probably also need to be developed with bsdcc.

I ftp'd expect from ftp.cme.nist.gov.

You need to change several lines in the makefile.  First you need
to customize source and target directories and files:
#
TCLHDIR = /usr/include
TCLLIB = -ltcl
MANDIR = /usr/man/manl               (local man-pages)
MANEXT = l
BINDIR = /u/local/bin
LIBDIR = /usr/lib
HDIR = /usr/include
...
Next set the compiler, switches, and configuration options:
#
CC = bsdcc
CFLAGS = -O
...
PTY_TYPE = bsd
...
INTERACT_TYPE = select
...
Then you need to make these changes about line 90 or so:
comment out CFLAGS = $(CLFLAGS)
un-comment these lines:
CFLAGS = $(CLFLAGS) $(CPPFLAGS)
LFLAGS = ($CLFLAGS)

Then run 'make'.

You can't run some of the examples without modification (host name,
etc).  I don't remember if I ran all of them or not, but I ran enough
that I was satisfied it worked.

______________________________________________________________________________
5.00: Third party products

[ Editor's note: Entries in this section are edited for formatting and for
  the purpose of not being like advertising. ]

Some information in here seems rather outdated......


5.01: Disk/Tape/SCSI
From: anonymous

- Most SCSI disk drives work (IBM resells Maxtor, tested Wren 6&7 myself)

- Exabyte: Unfortunately only the ones IBM sells are working

- STK 3480 "Summit": Works with Microcode Version 5.2b


5.02: Disks
From: [e-mail]

For third-party disks for the RS6000, I can recommend:  Ken Been at
National Peripherals, [phone].


5.03: Memory
From: [e-mail] (Doug Blain)

I have received a FAX from Kingston Technologies on SIMM memory upgrades
for the RS6000 (model 320/520 only so far).  They are complete
replacements for the installed SIMMs from IBM ( you get to keep the IBM
SIMMs and perhaps use them elsewhere).  They have a 16, 32 and 64 MB
range of kits.  The quoted list prices are;

      16 MB SIMM Kit   $ 3,995
      32 MB SIMM Kit   $ 8,995
      64 MB SIMM Kit   $21,585

One option they mention in their letter is to purchase an additional
memory card from IBM (type S1 or higher) and populate it with the new
memory, since the RS/6000 will support two memory cards.  The list price
for the IBM 16mb SIMMs is $9520 (however our SE is hinting at price
reductions of 25% soon).  Kingston Technologies can be contacted at
714-435-2600.  Standard disclaimers apply...no association, benefits, etc.

From: [e-mail] (Dick Karpinski)

Dick Verling at 415-381-2081 offers a 64MB upgrade for a bit over $5k.


5.04: Others
From: anonymous

IBM RISC System/6000 Interface Products

National Instruments Corporation announced April 13 a family of
instrumentation interface products for the IBM RISC System/6000
workstation family.  The interface family consists of three products
that give the RISC System/6000 connectivity to the standards of VMEbus,
VXIbus and GPIB.  For more information, contact National Instruments
Corporation, 512-794-0100 or 1-800-433-3488.


5.05: IBM list of third party products
From: [e-mail] (Marc Pawliger)

Marc Pawliger post an extensive list periodically on this newsgroup
about various third party hardware products for the RS/6000.  This list
can also be ftp'd from ibminet.awdpa.ibm.com.


5.06: C++ compilers

There are two software vendors providing C++ compilers, Glockenspiel and
Greenhills.  xlC++ is available from IBM.
______________________________________________________________________________
6.00: Miscellaneous other stuff

6.01: Can I get support by email?

AIXServ is a service tool that allows users connected to the internet
and usenet to report problems using unix mail (E-Mail).  AIXServ is
available at no charge, to request a copy of this package send a note to
one of the following E-Mail addresses:

    Internet:        [e-mail]
    USENET:          uunet.UU.NET!aixserv!aixbugs
 austin.ibm.com domain:  [e-mail]

with the subject of "package".

The package will be mailed electronically and will contain instructions
for using AIXServ.

Using AIXServ, customers have the ability to 1) open new problem reports
2) update existing problem records 3) Request a status update on an
existing problem record.


6.02: Some RS232 hints
From: [e-mail]

Q: How do you connect a terminal to the RS232 tty ports when not using
   the standard IBM cable & terminal transposer?
A: 1- Connect pins 2->3, 3->2, 7->7 on the DB25's
   2- On the computer side, loop pins 8->20 (DCD & DTR)

When booting from diskettes, the port speed is always 9600 baud.  If you
use SMIT to set a higher speed (38400 is nice) for normal use, remember
to reset your terminal before booting.

Q: How do you connect a printer to the RS232 tty ports
A: 1- Connect pins 2->3, 3->2, 7->7 on the DB25's
   2- On the computer side, loop pins 4->5 (CTS & RTS)


6.03: VT100 key bindings for aixterm
From: [e-mail] (Konrad Haedener)

Add this to your .Xdefaults file and start your VAX session with
'aixterm -v -name vt100 -e telnet MYVAXHOST'

-----
vt100.foreground: Wheat
vt100.background: MidnightBlue
vt100.font: Rom14.500
vt100.geometry: 80x25+0+0
vt100.vt102: true
vt100.fullcursor: false
vt100.pointerColor: coral
vt100.cursorColor: gray100
vt100.translations:    <Key>F1: string(0x1b) string("OP") \n\
                       <Key>F2: string(0x1b) string("OQ") \n\
                       <Key>F3: string(0x1b) string("OR") \n\
                       <Key>F4: string(0x1b) string("OS") \n\
                       <Key>KP_0: string(0x1b) string("Op") \n\
                       <Key>KP_1: string(0x1b) string("Oq") \n\
                       <Key>KP_2: string(0x1b) string("Or") \n\
                       <Key>KP_3: string(0x1b) string("Os") \n\
                       <Key>KP_4: string(0x1b) string("Ot") \n\
                       <Key>KP_5: string(0x1b) string("Ou") \n\
                       <Key>KP_6: string(0x1b) string("Ov") \n\
                       <Key>KP_7: string(0x1b) string("Ow") \n\
                       <Key>KP_8: string(0x1b) string("Ox") \n\
                       <Key>KP_9: string(0x1b) string("Oy") \n\
                       <Key>KP_Divide: string(0x1b) string("OQ") \n\
                       <Key>KP_Multiply: string(0x1b) string("OR") \n\
                       <Key>KP_Subtract: string(0x1b) string("OS") \n\
                       <Key>KP_Add: string(0x1b) string("Om") \n\
                       <Key>KP_Enter: string(0x1b) string("OM") \n\
                       <Key>KP_Decimal: string(0x1b) string("On") \n\
                       <Key>Next: string(0x1b) string("Ol") \n\
                       <Key>Left: string(0x1b) string("OD") \n\
                       <Key>Up: string(0x1b) string("OA") \n\
                       <Key>Right: string(0x1b) string("OC") \n\
                       <Key>BackSpace : string(0x7f) \n\
                       <Key>Down: string(0x1b) string("OB")

You should also add

XENVIRONMENT=$HOME/.Xdefaults
export XENVIRONMENT

to your .profile.


6.04  What publications are available for AIX and RS/6000?

The following are free just for the asking:

1. RS/Magazine
   P.O. Box 3272
   Lowell, MA 01853-9876

2. AIXpert
   IBM Corporation
   Mail Stop 36
   472 Wheelers Farms Road
   Milford, CT 06460

3. RiSc World
   P.O. Box 399
   Cedar Park, TX 78613


These manuals should be available from your friendly neighborhood IBM office.

SC23-2204-02  Problem Solving Guide
SA23-2631-05  Diagnostic Programs: Operator Guide
SA23-2632-05  Diagnostic Programs: Service Guide
SA23-2643-01  Hardware Technical Reference: General Information
SA23-2646-01  Hardware Technical Reference: Options and Devices
SA23-2629-07  Service Request Number Cross Reference, Ver 2.2


6.05: Some acronyms

BOS  - Basic Operating System
ODM  - Object Database Manager
LPP  - Licensed Program Product
SMIT - System Management Interface Tool
PTF  - Program Temporary Fix
APAR - authorized program analysis report
PRPQ - programming request for price quotation
DCR  - design change request
_____________________________________________________________________________
7.00: How do I get this by mailserver or ftp?

Since the articles are crossposted to news.answers, any archive carrying
that newsgroup will also have these articles.